|
|
Post by cpace248 on Apr 27, 2015 22:41:40 GMT
I have had my bike now for a few weeks. (15 gsxs 750) and almost at 500 miles. The stock exhaust is killing me and ready for a slip on. Obviously for the gsxs is very limited I have found 2 akrapovic and a leo vince so far. Im sure everyone knows the gsr 750 has been out for awile with lots of options. Im pretty confident that a gsr slip on should work but would be nice to have someone confirm. I like my exhaust on the louder side for sure and like some of the exhaust by MIVV (Italian company)
|
|
|
|
Post by harrywz on Apr 27, 2015 23:26:34 GMT
I guess you didn't see my post regarding my Leo Vince slip on. I couldn't find anything for a GSX-S750. Did my searching on EBay under GSR-750, exhaust. There are tons of pipes available. Starting with Arrow to Xill. Arrow has a full exhaust available.
Slipon that I bought took 20 minutes to install and fits perfectly. For those on a budget, Danmoto has a full line as well.
|
|
|
|
Post by cpace248 on Apr 28, 2015 2:49:22 GMT
maybe I should have read the whole thing not skimmed it.. my bad. Hopefully in the next couple weeks I can get one on the way.
|
|
|
|
Post by cpace248 on Apr 28, 2015 2:56:12 GMT
Also Revzilla is first place I have found for gsx-s parts
|
|
|
|
Post by harrywz on Apr 28, 2015 17:32:12 GMT
Motostarz carries parts as well.
link |
|
nando
New Member
Posts: 5 
|
Post by nando on May 4, 2015 21:48:22 GMT
I have been looking for headers for this bike not having any luck I want to get rid of the cat converter and just go headers back to exhaust ive been looking at all types of exhausts using gsr750 searching they seem nice not very loud on most of them
|
|
|
|
Post by harrywz on May 5, 2015 14:15:29 GMT
I have been looking for headers for this bike not having any luck I want to get rid of the cat converter and just go headers back to exhaust ive been looking at all types of exhausts using gsr750 searching they seem nice not very loud on most of them Here is an Ebay link for Arrow headers, link but you will also need collector, mid pipe and muffler to go with this
|
|
nando
New Member
Posts: 5
|
Post by nando on Jun 1, 2015 15:18:06 GMT
I have found the same headers but could not find a mid pipe so i opted for a cheap slip on until a full headers down system comes out. I also got a few accents like red levers, new mirrors, rear fender eliminator etc.
|
|
|
|
Post by gsxspride on Jun 22, 2015 22:24:50 GMT
I have heard removing that butterfly valve on the mid pipe is a bad idea. It actually does some good stuff.
|
|
|
|
Post by Team59 on Jul 12, 2015 22:12:22 GMT
i've heard the same, you need the back pressure to make better torque. Hoping to get my bike on my mates dyno soon so might try doing back to back runs with the butterfly working and locked open to get some hard evidence. Also having a look at my 07 GSXR 600 racebike the headers look to have a very similar layout (being more or less the same engine) so would not surprise me if you could make gixxer headers fit on the GSX-S with little to no modification. Might be an issue with pipe diameter though meaning you may need to run a gixxer pipe.
|
|
